Heated Oxygen Sensor (HO2S) RH

Socket, Exhaust Gas Oxygen Sensor:

SPECIAL TOOL(S)

REMOVAL
1. Raise and support the vehicle.







2. Remove the two bolts and position the heat shield aside.







3. Disconnect the HO2S electrical connector.







4. Using the special tool, remove the HO2S.

NOTE: If necessary, lubricate the HO2S with penetrating and lock lubricant to assist in removal.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: Apply a light coat of anti-seize lubricant to the threads of the HO2S.