Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2002 >> Explorer 4WD V6-4.0L VIN E >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo Cable >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo Cable: Service and Repair

REMOVAL







1. Remove the nut, bolt and the accelerator control splash shield.







2. Disconnect the speed control cable.
1 Disconnect the speed control cable end from the throttle nail head.
2 Depress the tabs and separate the speed control cable from the intake manifold.







3. Remove the speed control servo from the inner fender.
1 Disconnect the electrical connector.
2 Remove the speed control servo bracket mounting bolts.







4. Depress the locking tab and rotate the speed control cable cap to remove.







5. Remove the speed control cable.
1 Gently push the retaining spring.
2 Disconnect the speed control cable slug from the speed control servo pulley.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE: Make sure the rubber seal is fully seated onto the speed control cable cap.
pro multis · About Operation CHARM