Crankshaft, Engine
Crankshaft and FlywheelMain Bearing Journal Diameter 56.980 - 57.0 mm (2.243 - 2.244 inch)
Main Bearing Journal Runout Limit 0.05 mm (0.002 inch)
Main Bearing Journal Taper Maximum Per Inch 0.008 mm (0.0003 inch)
Connecting Rod Journal Maximum Out-of-Round 0.008 mm (0.0003 inch)
Crankshaft Free End Play 0.05 - 0.32 mm (0.002 - 0.0126 inch)
Main Bearing Journal Out-of-Round 0.008 mm (0.0003 inch)
Main Bearing Journal Runout TIR Maximum 0.05 mm (0.002 inch)
Main Bearing Journal Runout Service Limit 0.0127 mm (0.005 inch)
Main Bearing Thrust Face Runout TIR Maximum 0.0254 mm (0.010 inch)
Thrust Bearing Journal Length 26.39 - 26.44 mm(1.039 - 1.041 inch)
Main and Rod Bearing Journal Finish Maximum 72 and 88 RMS
Main Bearing Thrust Face Finish Maximum 20 RMS
Connecting Rod Journal Diameter 53.98 - 54.0 mm (2.125 - 2.126 inch)
Connecting Rod Journal Taper Per Inch Maximum 0.008 mm (0.0003 inch)
For crankshaft main bearing tightening sequence refer to Assembly procedure Service and Repair