Ignition Lock Cylinder - Functional

IGNITION SWITCH LOCK CYLINDER - FUNCTIONAL

Removal and Installation
1. Disconnect the battery ground cable and wait at least one minute.





2. Remove the screws and the instrument panel steering column cover.





3. CAUTION: Do not use a prying device to detach the shift lever boot or damage to the shrouds may result.

Detach the boot from the shrouds.





4. Remove the screws and the steering column shrouds.





5. Disconnect the electrical connector.





6. Remove the screw and the PATS transceiver.





7. With the key in the ACCESSORY position, depress the ignition lock cylinder release pin and remove the lock cylinder.
8. To install, reverse the removal procedure.
^ Verify the ignition switch lock cylinder operation.