Seat Regulator Control Switch

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the front seat back recliner handle.
1 Remove the screw.
2 Remove the front seat back recliner handle.







3. Pull to remove the front seat lumbar support knob.







4. Remove the front seat track side shield.
1 Remove the screws.
2 Remove the pin-type retainer.
3 Disconnect the electrical connectors (if equipped) and remove the front seat track side shield.







5. Remove the seat control switch from the front seat track side shield.
1 Remove the screws.
2 Remove the seat control switch.

INSTALLATION
1. To install, reverse the removal procedure.