Output State Control (OSC) Procedures

Output State Control (OSC) Procedures
- Carry out visual inspection and vehicle preparation as necessary.
- Select"Vehicle and Engine Selection" menu.
- Select appropriate vehicle and engine.
- Select"Diagnostic Data Link."
- Select"Powertrain Control Module."
- Select"Diagnostic Test Mode."
- Select"KOEO On-Demand Self Test and KOER On-Demand Self Tests."
- Carry out test and record DTCs.
- Repair all non-Transaxle DTCs.
- Repair all VSS and TR sensor DTCs.
- Make sure that VSS/TR sensors are functional.
- Select"Active Command Modes."
- Select"Output State Control."
- Select"Trans-Bench Mode or Trans-Drive Mode."