Camshaft, Engine
| Camshaft | Camshaft bore inside diameter no. 1, 2, 3, 4, 5 | 45.796-45.821 mm |
| End play | 0.02-0.20 mm | |
| Service limit | 0.20 mm | |
| Journal to cylinder head bearing surface clearance | 0.03335-0.0835 mm | |
| Journal diameter standard | 45.7375-45.7625 mm | |
| Runout limit | 0.127 mm (runout of center bearing relative to bearing nos. 1 and 5) | |
| Out-of-round limit | 0.08 mm | |
| Camshaft drive assembled gear face runout crankshaft | 0.65 mm | |
| Camshaft drive assembled gear face runout camshaft | 0.275 mm | |
| Camshaft position sensor (CMP) | 18 ft. lbs. |