Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2002 >> Ranger 2WD L4-2.3L VIN D >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Sensor, Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Sensor, Rear

Sensor - Rear

Removal and Installation
1. Raise and support vehicle.





2. NOTE: Clean off dirt and foreign material that may have collected around the rear anti-lock brake sensor before removal.

Remove the rear anti-lock brake sensor.
1. Disconnect the rear anti-lock brake sensor electrical connector.
2. Remove the bolt.
3. Remove the rear anti-lock brake sensor.





3. NOTE: Thoroughly clean the mounting surface.

NOTE: Inspect the anti-lock brake sensor O-ring for damage; lightly lubricate the O-ring with SAE 75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B or equivalent meeting Ford specification WSL-M2C192-A.

To install, reverse the removal procedure.
pro multis · About Operation CHARM