Camshaft, Engine

Left Side:

LH Camshaft Bearing Cap

CAUTION: Install the camshaft bearing caps. The camshaft bearing caps are positional and must be installed in their original locations and orientations or engine damage may occur.

Tighten the bolts in three stages in the sequence shown.
- Stage 1: Hand-tighten.
- Stage 2: Tighten to 6 Nm (53 inch lbs.).
- Stage 3: Tighten an additional 90°.

Right Side:

RH Camshaft Bearing Cap

CAUTION: Install the camshaft bearing caps. The camshaft bearing caps are positional and must be installed in their original locations and orientations or engine damage may occur. Install the RH camshaft bearing caps.

Position the bearing caps. Install the bolts. Tighten the bolts in three stages in the sequence shown.
- Stage 1: Hand-tighten.
- Stage 2: Tighten to 6 Nm (53 inch lbs.).
- Stage 3: Tighten an additional 90°.