Ignition Switch: Service and Repair

Ignition Switch

Removal and Installation
1. Remove the instrument panel cluster finish panel.





2. Remove the steering column reinforcement.
1. Remove the bolts.
2. Remove the reinforcement.
3. Disconnect the ignition switch electrical connector.





4. Remove the ignition switch lock cylinder assembly.
1. Disconnect the electrical connector.
2. Remove the three screws.
3. Remove the ignition switch lock cylinder assembly.





5. NOTE: The ignition key should be in the OFF position. Remove the ignition switch.

1. Remove the screw.
2. Remove the ignition switch.
6. To install, reverse the removal procedure.