Canister Purge Control Valve: Service and Repair
REMOVAL1. Disconnect the battery ground cable.
WARNING: THE EVAPORATIVE EMISSION SYSTEM CONTAINS FUEL VAPOR AND CONDENSED FUEL VAPOR. ALTHOUGH NOT PRESENT IN LARGE QUANTITIES, IT STILL PRESENTS THE DANGER OF EXPLOSION OR FIRE. DISCONNECT THE BATTERY GROUND CABLE FROM THE BATTERY TO MINIMIZE THE POSSIBILITY OF AN ELECTRICAL SPARK OCCURRING, POSSIBLY CAUSING A FIRE OR EXPLOSION IF FUEL VAPOR OR LIQUID FUEL IS PRESENT.
2. Disconnect the electrical connector.
3. Remove the vacuum hose.
4. Remove the clamp and hose.
5. Remove the hose.
6. Remove the nuts.
INSTALLATION
1. To install, reverse the removal procedure.
^ Carry out the system leak test. Evaporative Emission System Leak Test
^ Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle