Removal and Installation

Fuel Line Disconnect Tool:

SPECIAL TOOL(S)

REMOVAL
1. Disconnect both battery ground cables.

WARNING: SMOKING OR OPEN FLAME OF ANY TYPE MUST NOT BE PRESENT WHEN WORKING NEAR FUEL OR FUEL VAPOR.

2. Raise and support the vehicle.







3. Open the fuel/water separator drain valve to release the fuel pressure.







4. Disconnect the electrical connectors.
^ Disconnect the fuel pump electrical connector.
^ Disconnect the fuel warmer electrical connector.
^ Disconnect the water-in-fuel electrical connector.







5. Disconnect the fuel hoses.
1 Remove the fuel hose retaining clips and discard. Disconnect the fuel hoses from the fuel pump.
2 Press in the retaining clips and release the fuel hoses.







6. Remove the mounting nuts and the fuel conditioning module.

INSTALLATION
1. To install, reverse the removal procedure.