Shift Solenoid: Service and Repair

Shift Solenoids (SS)

Removal and Installation

NOTE: Some solenoid body bolts and wire loom bolts will need to be removed in order to remove affected solenoids.

NOTE: The line pressure solenoid is not serviced in the vehicle. The solenoid body will need to be removed to remove line pressure solenoid.

1. Disconnect the battery ground cable.
2. Remove the transmission fluid pan, gasket and filter.





3. Disconnect the affected shift solenoid electrical connector.
4. Remove the affected shift solenoid.
1 Remove the retaining "E" clip.
2 Remove the affected shift solenoid.





5. To install, reverse the removal procedure.