Initial Inspection and Diagnostic Overview
INSPECTION AND VERIFICATIONWARNING:
- When servicing starter motor or performing other underhood work in the vicinity of the starter motor, be aware that the heavy gauge battery input lead at the starter solenoid is "electrically hot" at all times. A protective cap or boot is provided over the terminal of this lead and must be installed after servicing.
- When working in area of the starter motor, be careful to avoid touching hot exhaust components.
NOTE: When working on the starter system, make sure the anti-theft system is deactivated, if equipped.
1. Verify the customer concern by operating the starting system.
Visual Inspection Chart:
2. Visually inspect for obvious signs of mechanical and electrical damage. Refer to the chart.
3. If the concern is not visually evident, verify the symptom. GO to Symptom Chart. Symptom Related Diagnostic Procedures