Trunk / Liftgate: Service and Repair

LIFTGATE

REMOVAL
1. Remove the D-pillar trim panels and rear coat hooks.
2. Position the headliner to access the rear washer hose and the liftgate electrical harness connectors.







3. Remove the components in the order indicated in the illustration and table.

Item 3: Liftgate Strut Removal Note







1. CAUTION: Support the liftgate before removing the liftgate struts.

Remove the liftgate struts.

Item 4 : Liftgate Bolt and Washer Removal Note
1. With a wax pencil, mark the position of each hinge to aid in the installation of the liftgate.

Item 5: Liftgate Removal Note

1. CAUTION: To avoid damaging the liftgate, this step requires an assistant.

Remove the liftgate.

INSTALLATION
1. To install, reverse the removal procedure. Transfer components as necessary.

Item 4: Liftgate Bolt and Washer Installation Note

1. CAUTION: Hinge fasteners are a self-tapping design. To minimize the possibility of cross threading, hand start all fasteners during installation.

With the aid of an assistant install the bolts and align hinges to previously made alignment marks and tighten.