Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2003 >> Explorer AWD V8-4.6L VIN W >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Sensor, Front
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Sensor, Front





Front Wheel Speed Sensor and Sensor Ring

Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the front wheel and tire assembly.
3. Remove the components in the order indicated in the following illustration and table.








4. To install, reverse the removal procedure.

Item 2: Front Disc Brake Caliper Anchor Plate, Caliper, and Pads Removal Note

1. CAUTION: When removing the front disc brake components, never allow them to hang from the brake hose.

Using mechanic's wire, secure the front brake components.

Item 3: Front Disc Removal Note
1. Match mark the front disc and front wheel hub flange before removing the front disc.

Item 4: Harness Connector Removal Note

1. NOTE: The harness connector is located in the engine compartment secured to the fender apron.

Lower the vehicle.

Item 5: Harness Retainers Removal Note
1. Raise the vehicle on a hoist.

Item 8: Sensor Ring Removal Note
1. The sensor ring is integral to the front wheel hub and bearing assembly and cannot be serviced.
pro multis · About Operation CHARM