Test P

PINPOINT TEST P: LFC 52/DTC B2439 - PASSENGER SAFETY BELT BUCKLE SWITCH RESISTANCE OUT OF RANGE

Test P1:

Test P2:

Test P2-P5:

Test P6:

Test P7:

Normal Operation
The restraints control module (RCM) checks the passenger safety belt buckle switch circuits for faults. If the RCM detects a current out of range fault, it will store diagnostic trouble code (DTC) B2439 in memory and flash lamp fault code (LFC) 52 (or higher priority code if one exists) on the air bag indicator.

Possible Causes
A passenger safety belt buckle switch current out of range fault can be caused by:
- damaged wiring, terminals, or connectors.
- a faulty passenger safety belt buckle switch.
- RCM is faulted.