Rear Window Wiper

REAR WINDOW WIPER

REMOVAL












1. Remove the components in the order indicated in the illustration and table. To remove individual components, only carry out the listed steps.

Item 1: Pivot Arm Nut Removal Note







1. Remove the rear window wiper pivot arm nut cover.

Item 2: Rear Window Wiper Pivot Arm Removal Note
1. To ensure the rear window wiper motor is in the PARK position, turn the rear window wiper motor to ON and allow it to operate for at least one cycle.
2. Turn the rear window wiper motor switch to OFF and mark the position of the end of the wiper blade on the back glass for reinstallation.

INSTALLATION
1. To install, reverse the removal procedure.

Item 2: Rear Window Wiper Pivot Arm Installation Note
1. Position the end of the rear window wiper blade on the mark made before removal.