Front

REMOVAL
1. Prepare the vehicle for heater blower motor switch resistor removal.
1 Disconnect the battery ground cable.
2 Remove the air cleaner assembly.







2. Detach the speed control servo.
1 Disconnect the electrical connector.
2 Remove the bolt.
3 Position the speed control servo aside.







3. Position the coolant expansion tank/windshield washer reservoir aside.
1 Remove the screws and nuts.
2 Position the reservoir aside.







4. Disconnect the heater blower motor switch resistor electrical connector.







5. Remove the screws and the heater blower motor switch resistor.

INSTALLATION
1. To install, reverse the removal procedure.