Alternator: Service and Repair

REMOVAL
1. Disconnect the battery.
2. Remove the air cleaner outlet tube.
3. Remove the drive belt.







4. Disconnect the wiring harness to voltage regulator electrical connector.







5. Remove the B+ terminal cover.







6. Remove the B+ terminal electrical connector.
1 Remove the B+ terminal nut.
2 Disconnect the B+ terminal electrical connector.







7. Remove the wiring harness-to-generator pin-type retainer.







8. Remove the generator.
1 Remove the stud bolts and nut.
2 Remove the generator.

INSTALLATION
1. To install, reverse the removal procedure.