Camshaft, Engine

Camshaft drive assembled gear face runout crankshaft 0.65 mm
Camshaft drive assembled gear face runout camshaft 0.275 mm
Lobe lift intake 6.23 mm
Lobe lift exhaust 6.23 mm
Allowable lobe lift loss 0.127 mm
Theoretical valve maximum lift intake 10.28 mm
Theoretical valve maximum lift exhaust 10.28 mm
End play 0.02-0.20 mm
Service limit 0.20 mm
Journal to cylinder head bearing surface clearance 0.03335-0.0835 mm
Journal diameter standard 45.7375-45.7625 mm
Runout limit (a) 0.127 mm
Out-of-round limit 0.08 mm

Camshaft pulley bolt 105 Nm (77 ft. lbs.)

(a) runout of center bearing relative to bearing nos. 1 and 5.