Alarm System Transponder: Service and Repair

PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER

REMOVAL







1. Remove the audio control switch (if equipped).
1 Using a thin bladed screwdriver, release the locking tang.
2 Disconnect the audio control switch electrical connector.







2. Remove the steering column lower shroud.







3. Disconnect the PATS transceiver electrical connector.







4. Remove the PATS transceiver.
1 Remove the PATS transceiver retaining screw.
2 Remove the PATS transceiver.

INSTALLATION
1. To install, reverse the removal procedure.