Shift Interlock: Service and Repair

Brake Shift Interlock Actuator

Removal
1. Remove the floor console.





2. Disconnect the Overdrive (O/D) switch electrical connector (selector lever assembly removed shown).





3. Remove the shift interlock actuator.
1 Remove the bolt.
2 Pull off the knob.
3 Pull out of the push rod.

Installation





1. Install the shift interlock actuator.
1 Install the push rod.
2 Position the knob.
3 Install the bolt.





2. Connect the O/D switch electrical connector (selector lever assembly removed shown).
3. Install the floor console.