Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2003 >> Mustang V8-4.6L DOHC VIN R >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Assembly >> Service and Repair >> Control Assembly, HVAC
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Assembly, HVAC




Remover, Heater Control Cable Retainer:






SPECIAL TOOL(S)

REMOVAL
1. Remove the center instrument panel register. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Center Finish Panel, Center Finish Panel







2. Remove the screws.







3. Disconnect the connectors.







4. Using the special tool, disconnect the temperature control cable from the control head.







5. Remove the nuts and disconnect the vacuum connector.

INSTALLATION







1. Align the blend door driver to the full heat position.







2. Place the temperature control knob in the full WARM position.







3. Attach the cable drive to the control head.







4. Rotate the knob back and forth from full WARM to full COOL.







5. Check the cable control for correct range of movement.







6. Connect the electrical connectors.







7. Install the vacuum connector and nuts.







8. Install the control head.
9. Install the center instrument panel register. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Center Finish Panel, Center Finish Panel
pro multis · About Operation CHARM