Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2003 >> Ranger 2WD V6-3.0L VIN V Flex Fuel >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Spark Plug >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Spark Plug: Service and Repair

Spark Plug Wire Remover:






SPECIAL TOOL(S)

REMOVAL







1. Use the Spark Plug Wire Remover to grasp and twist the spark plug wire boot back and forth on the spark plug insulator to release the connector.

CAUTION: Do not pull on the spark plug wire as it may separate from the spark plug wire connector inside the spark plug wire boot.







2. Loosen the spark plug.
3. Remove any foreign material from the spark plug areas of the cylinder head with compressed air.







4. Remove the spark plug.
5. Inspect the spark plugs.







6. Adjust the spark plug gap as necessary.

INSTALLATION
1. To install, reverse the removal procedure.
^ Use a small, clean tool to coat the entire interior surface of the boot with silicone brake caliper grease.
pro multis · About Operation CHARM