High Mounted Stoplamp - LED Module, Four Door

REMOVAL

CAUTION: Take care not to damage the rear parcel shelf or the LED module.







1. Disengage the LED module from the parcel shelf.
1 Insert two thin bladed 20 mm (0.8 in) wide tools (approximately 60 mm (2.4 in) from the outside edges of the LED module) and push rearward to disengage the snaps.
2 Lift the front of the LED module from the parcel shelf.







2. Remove the LED module.
^ Disconnect the connector and pull the LED module forward.

INSTALLATION
1. To install, reverse the removal procedure.