Toe Adjustment
Front Toe Adjustment1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight forward" position using a suitable holding device.
3. Loosen the nuts and remove the clamps.
4. NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod is rotated.
Rotate the front wheel spindle tie-rods.
5. Tighten the nuts. Install the clamps.
6. Start the engine and recenter the steering wheel.
^ Recheck the toe settings and adjust if necessary.
Rear Toe Adjustment
1. Start the engine and center the steering wheel.
1. Turn the engine off, and hold the steering wheel in the "straight forward" position using a suitable holding device.
3. Loosen the nut.
^ Clean the nut and toe link threads.
4. Rotate the toe link to adjust the toe.
5. Tighten the nut.
6. Recheck the toe settings and adjust if necessary.