Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2004 >> Crown Victoria V8-4.6L VIN W >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Body Control Module >> Service and Repair >> Driver Door (DDM) Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver Door (DDM) Module

MODULE - DRIVER DOOR (DDM)

REMOVAL

1. CAUTION: Prior to removal of the driver door module (DDM), it is necessary to upload module configuration information to a diagnostic tool. This information needs to be downloaded into the new module once installed.

Disconnect the battery ground cable.

2. Remove the driver door trim panel.







3. Remove the driver door module (DDM).
1 Disconnect the electrical connector.
2 Remove the screws.
3 Release the locking tab.

INSTALLATION

1. CAUTION: Once the new DDM is installed, it is necessary to download the module configuration information from the diagnostic tool into the new module.

To install, reverse the removal procedure.
- Check for correct operation.
pro multis · About Operation CHARM