Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2004 >> Excursion 2WD V10-6.8L VIN S >> Repair and Diagnosis >> Heating and Air Conditioning >> High Pressure Safety Valve HVAC >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

High Pressure Safety Valve HVAC: Service and Repair

AIR CONDITIONING (A/C) PRESSURE RELIEF VALVE

REMOVAL

CAUTION: Refrigerant Compressor Oil (mineral oil) F73Z-19577-AA (Motorcraft YN-9-A) should be used to lubricate R-134a refrigerant system O-ring seals only and should not be added to R-134a refrigerant systems as an A/C compressor lubricant. PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B only should be used as an A/C compressor lubricant.

NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning system except when there is physical evidence of contamination from a failed compressor or damage to the suction accumulator.

1. Recover the refrigerant.







2. Remove the pressure relief valve.

INSTALLATION
1. To install, reverse the removal procedure.
- Install a new O-ring seal lubricated in clean mineral oil.
- Lubricate the refrigerant system with the correct amount of clean mineral oil.

2. Evacuate, leak test and charge the refrigerant system.
pro multis · About Operation CHARM