Crankshaft Main Bearing
CrankshaftMain bearing journal diameter 67.482-67.504
Maximum out-of-round 0.0075 mm (in) between cross sections
Maximum taper (Straightness) 0.004 mm
Runout: FIM of center journals when located on front and rear journal 0.05 mm 3 Places
Clearance - crankshaft journal-to-main bearing clearance 0.048-0.024 mm
Connecting rod journal diameter 53.003-52.983 mm
Maximum out-of-round 0.0075 mm between cross sections
Maximum taper 0.004 mm
Crankshaft end play 0.075-0.377
Crankshaft Main Bearing Caps
Tighten fasteners 1 through 12 in two stages, in the sequence shown.
^ Stage 1: Tighten to 40 Nm (30 ft. lbs.).
^ Stage 2: Tighten an additional 90°.
Tighten fasteners 13 through 24 in two stages, in the sequence shown.
^ Stage 1: Tighten to 30 Nm (22 ft. lbs.).
^ Stage 2: Tighten an additional 90°.