Fuel Conditioning Module Removal and Installation

FUEL CONDITIONING MODULE

Fuel Line Disconnect Tool:

SPECIAL TOOL(S)

REMOVAL

1. WARNING: Smoking or open flame of any type must not be present when working near fuel or fuel vapor.

Disconnect both battery ground cables.

2. Raise and support the vehicle.







3. Open the fuel/water separator drain valve to release the fuel pressure.







4. Disconnect the electrical connectors.
- Disconnect the fuel pump electrical connector.
- Disconnect the fuel warmer electrical connector.
- Disconnect the water-in-fuel electrical connector.







5. Disconnect the fuel hoses.
1 Remove the fuel hose retaining clips and discard. Disconnect the fuel hoses from the fuel pump.
2 Press in the retaining clips and release the fuel hoses.







6. Remove the mounting nuts and the fuel conditioning module.

INSTALLATION
1. To install, reverse the removal procedure.