Liftgate Window Glass: Service and Repair
LIFTGATE WINDOW GLASSREMOVAL
1. Remove the rear window wiper motor.
2. Disconnect the rear window defrost electrical connectors.
3. CAUTION:
- The liftgate glass must be supported when removing and installing the liftgate assist cylinders.
- Do not extend the socket clips more than 2.0 mm (0.08 in) or failure of the socket can occur.
Disconnect the two liftgate glass assist cylinders.
1 Insert a screwdriver blade under the socket clip and lift.
2 Gently pull the socket off the ball stud.
4. Remove the liftgate glass hinge bolts and remove the glass.
INSTALLATION
1. To install, reverse the removal procedure.