Windshield Wiper

WINDSHIELD WIPER

REMOVAL












1. Remove the parts in the order indicated in the illustration and table.

Item 1: Windshield Wiper Pivot Arm Removal Note







1. Remove the pivot arm.
1 Pull up on the pivot arm.
2 Pull out on the retainer tab and remove the pivot arm.

Item 2: Cowl Panel Grille Removal Note

1. NOTE: The cowl panel grille is held in place by clips.

Remove the RH side cowl grille panel before removing the LH side cowl panel grille.

INSTALLATION
1. To install, reverse the removal procedure.

Item 1: Windshield Wiper Pivot Arm Installation Note
1. Cycle and park the windshield wipers.







2. Verify the distance between the center of the (1) RH windshield wiper blade and the (3) bottom of the windshield glass is within specification.







3. Verify the distance between the center of the (2) LH windshield wiper blade and the (3) bottom of the windshield glass is within specification.
4. If the distance is not within specification, remove the windshield wiper pivot arm and reposition to specification.