Spark Plug: Service and Repair

IGNITION COIL-ON-PLUG AND SPARK PLUG

REMOVAL

NOTE: LH shown, RH similar.

1. Disconnect the battery ground cable.












2. Remove the parts in the order indicated in the illustration and table. To remove individual parts, only carry out the listed steps.

Item 4: Spark Plug Removal Note
1. Use compressed air to remove any foreign material from the spark plug well before removing the spark plugs.


INSTALLATION
1. To install, reverse the removal procedure.

Item 4: Spark Plug Installation Note







1. Inspect the spark plugs and adjust the spark plug gap as necessary.

Item 3: Ignition Coil-On-Plug Installation Note
1. Apply dielectric compound to the inside of the coil boots before installation.