Flywheel: Service and Repair

Flexplate or Flywheel and Crankshaft Rear Seal

Special Tools And Equipment:

Special Tool(s)

Material:

Material

1. With the vehicle in neutral, position it on a hoist.
2. Remove the transaxle.
3. Remove the parts in the order indicated in the illustration and table.

Part 1 Of 2:

Part 2 Of 2:

To remove individual parts, only carry out the listed steps:

Item 3: Crankshaft Rear Seal Removal Note

1. Using the special tools, remove the crankshaft rear seal.

Item 3: Crankshaft Rear Seal Installation Note
1. Clean and inspect the mating surface.

2. NOTE: Lubricate the crankshaft rear seal lips with clean engine oil prior to installation.

Assemble the special tools and the crankshaft rear seal.

3. Install the special tools on the rear of the crankshaft.

4. Install the crankshaft rear seal. Tighten the center jack screw until the spacer contacts the engine block.