Brake Pedal Assy: Service and Repair
Brake PedalNOTE: The adjustable pedal assembly is shown, the fixed pedal assembly is similar.
1. If equipped with adjustable pedals, make sure they are in the full forward position.
2. Remove the instrument panel steering column reinforcement.
Part 1 Of 3:
Part 2 Of 3:
Part 3 Of 3:
3. Remove the parts in the order indicated in the following illustration and table. To remove individual parts, only carry out the listed steps: To remove individual parts, only carry out the listed steps: (Continued)
4. To install, reverse the removal procedure.
Item 1: Redundant Self Locking Pin Cover Removal Note
1. Disconnect the steering intermediate shaft upper bolt and position the shaft aside.
Item 7: Brake Booster Nuts Removal Note
1. Position the brake booster forward enough to allow the brake booster studs to clear the brake pedal assembly.
Item 11: Drive Cable Assembly Removal Note
1. Release the cable assembly from the motor and the transmissions.