Crankshaft, Engine

Crankshaft main bearing caps.
Stage 1: Tighten to 50 Nm (37 ft. lbs.).
Stage 2: Rotate an additional 120 degrees.
Main bearing bridge nuts 32 Nm (24 ft. lbs.)

Crankshaft
Main bearing journal diameter 63.983-64.003 mm (2.5190-2.5198 inch)
Main bearing journal maximum taper 0.008 mm (0.0003 inch) per 25 mm (1.0 inch)
Main bearing journal maximum out-of-round; 0.008 mm (0.0003 inch) max. in 45 degrees, 0.015 mm (0.006 inch) total
Main bearing journal-to-cylinder block clearance-desired 0.025-0.035 mm (0.001-0.0014 inch)
Main bearing journal-to-cylinder block clearance-allowable 0.013-0.058 mm (0.0005-0.0023 inch)
Connecting rod journal diameter 58.682-58.702 mm (2.3103-2.3111 inch)
Connecting rod journal maximum taper 0.008 mm per 25 mm (0.0003 in per inch)
Connecting rod journal maximum out-of-round; 0.008 mm (0.0003 inch) max. in 45 degrees, 0.015 mm (0.0006 inch) total
Crankshaft maximum end 0.10-020 mm (0.004-0.008 play inch)