Output Shaft Speed (OSS) Sensor

Removal
1. With the vehicle in NEUTRAL, position it on a hoist.





2. Disconnect output shaft speed (OSS) sensor electrical connector.





3. Remove OSS sensor.
1. Remove the OSS sensor screw.
2. Remove the OSS sensor from the transmission.
^ Inspect the OSS sensor O-ring for damage. If damaged, install a new O-ring.

Installation





1. Inspect and lubricate O-ring with petroleum Jelly.
1. Install the OSS sensor into the transmission.
2. Tighten OSS sensor screw.





2. Connect OSS sensor electrical connector.