Auto-Dimming Interior Mirror
AUTO-DIMMING INTERIOR MIRRORREMOVAL
1. If equipped, position the electronic compass sensor aside.
2. Disconnect the auto-dimming interior mirror electrical connector.
3. Position the auto-dimming interior rear view mirror outboard (towards the driver door) to its full extension.
4. Rotate the auto-dimming interior mirror back until it is parallel with the windshield. The auto-dimming interior mirror mount is now locked between the two adjustment balls and joints.
5. NOTE: It takes approximately 10 pounds of force to remove the auto-dimming interior mirror from the windshield bracket.
Hold the auto-dimming interior mirror firmly in one hand and strike the auto-dimming interior mirror with the palm of an open hand.
INSTALLATION
1. Seat the auto-dimming interior mirror base partially on the mounting button.
2. Rotate the auto-dimming interior mirror fully up.
3. Slide the auto-dimming interior mirror base down on the mounting button until a click is heard.
4. Connect the auto-dimming interior mirror electrical connector.
5. If equipped, install the electronic compass sensor.