Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Escape 2WD L4-2.3L VIN Z >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Seat Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Sensor/Switch: Service and Repair

SEAT POSITION SENSOR







Removal and Installation

WARNING:
- Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module. This will reduce the risk of injury in the event of an accidental deployment.
- To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:
- The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault.
- The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
- Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic procedure again.
- The seat must be in rearward position.

1. Depower the system.
2. Disconnect the seat position sensor electrical connector.
3. Remove the screw and the seat position sensor.
4. To install, reverse the removal procedure.
5. Repower the system.
pro multis · About Operation CHARM