Selector Lever

Transmission Selector Lever





Removal
1. With the vehicle in NEUTRAL, position it on a hoist.





2. Place the floor shift selector lever in the (D) position.





3. Gently pry up to remove the upper shift lever trim ring.





4. Remove the top finish panel.





5. Remove the shift cable from the gearshift assembly.
1 Disconnect the shift cable end from the gearshift lever.
2 Remove the shift cable from the bracket.





6. Remove the shifter.
1 Disconnect the electrical connector.
2 Remove the 4 bolts and remove the shifter.

Installation





1. Install the shifter assembly.
1 Install the shifter and the 4 bolts.
^ Tighten to 25 Nm (18 ft. lbs.).
2 Connect the electrical connector.





2. Install the upper center console assembly.





3. Install the upper shift lever trim ring.
^ To install the upper shift lever trim ring, orient the thick tab on the driver side front of the shifter and press into place.
4. Adjust the shift cable.