Output Shaft: Service and Repair

Stub Shaft Pilot Bearing and Seal





Special Tool(s)





Material

Removal
1. Remove the halfshaft assembly.





2. To remove the seal only, use the special tool to remove the stub shaft seal.





3. To remove the bearing and seal, use the special tools to remove the stub shaft pilot bearing and seal.

Installation





1. NOTE: Lubricate the new stub shaft pilot bearing with rear axle lubricant.

To install the bearing, use the special tools and install the stub shaft pilot bearing.





2. NOTE: Lubricate the new stub shaft pilot bearing housing seal with grease.

Using the special tools, install the stub shaft pilot bearing housing seal.

3. CAUTION: Inspect the inboard CV joint seal journal for rust or nicks/scratches prior to installing the halfshaft. If necessary, polish the seal journal with fine crocus cloth.

Install the halfshaft assembly.