Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Excursion 4WD V8-6.0L DSL Turbo VIN P >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Malfunction Indicator Lamp >> Description and Operation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Malfunction Indicator Lamp: Description and Operation

MALFUNCTION INDICATOR LAMP (MIL)


Malfunction Indicator Lamp (MIL):






The MIL informs the driver that the PCM has detected an OBD emission related component or system fault. When this occurs on a California calibrated engine, an OBD DTC is set. On a federal calibrated engine and transmission, certain faults also illuminate the MIL.
- On all vehicles, the MIL is located in the instrument cluster.
- The indicator is illuminated by a PCM message sent through the standard corporate protocol (SCP) communications network (Excursion) or the controller area network (CAN) (F-Super Duty or E-Series) to the Instrument cluster.
- An engine or transmission with federal calibration operating in the failure mode effects management (FMEM) may cause the MIL to be illuminated.
- To turn off the MIL after a repair, a clear DTCs command from the diagnostic tool must be sent to the PCM.
- For any MIL concern, go to Symptom Charts PCM Quick Test. QT: Powertrain Control Module (PCM) Quick Test
pro multis · About Operation CHARM