Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Excursion 4WD V8-6.0L DSL Turbo VIN P >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> Crankshaft Main Bearing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Main Bearing





Crankshaft Main Bearing
1) Tighten to 122 Nm (90 ft. lbs.) in numerical sequence.
2) Tighten to 163 Nm (120 ft. lbs.) in numerical sequence.
3) Tighten to 231 Nm (170 ft. lbs.) in the numerical sequence.





Install eight M8 x 30 bolts around the outside of the lower crankcase. Tighten bolts to the special torque using the sequence shown.





Install the lower crankcase. Install all 20 lower crankcase main bearing mounting bolts. Tighten mounting bolts in the following sequence.

1) Tighten to 122 Nm (90 ft. lbs.) in numerical sequence.
2) Tighten to 163 Nm (120 ft. lbs.) in numerical sequence.
3) Tighten to 231 Nm (170 ft. lbs.) in the numerical sequence.





Install eight M8 x 30 bolts around the outside of the lower crankcase. Tighten bolts to the special torque using the sequence shown.
pro multis · About Operation CHARM