Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Explorer 4WD V6-4.0L VIN E >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Pinpoint Tests >> M: C1998 Module Calibration Not Complete
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

M: C1998 Module Calibration Not Complete

Pinpoint Test M: DTC C1998 Module Calibration Not Complete

Normal Operation
The stability assist system needs to be recalibrated whenever a component specific to the system is disconnected or a new component is installed.

Possible Causes
^ anti-lock brake system (ABS) module
^ sensor cluster
^ steering position sensor

Tests M1 - M4:






PINPOINT TEST M: DTC C1998 MODULE CALIBRATION NOT COMPLETE

NOTE: The stability assist lamp flashes when a system calibration is required. Calibration is required after certain DTCs are cleared.

NOTE: Make sure the vehicle is not on a hoist and is sitting on level ground before carrying out the anti-lock brake system (ABS) module calibration.
pro multis · About Operation CHARM