Battery
BATTERY
Exploded View
Removal and Installation
WARNING: When lifting a plastic-cased battery, excessive pressure on the end walls could cause acid to spew through the vent caps resulting in personal injury, damage to the vehicle or to the battery. Lift with a battery carrier or with your hands on opposite corners. Failure to follow these instructions may result in personal injury.
1. Disconnect the battery.
2. Remove the battery heat shield.
3. Remove the battery hold down clamp and bolt.
- To install, tighten to 9 Nm (80 lb-in).
4. Remove the battery.
5. To install, reverse the removal procedure.