Attachment III - Technical Information

MODULE RECALIBRATION

[NEW] 1. Verify that the scan tool (WDS, VCM or equivalent scan tool) is updated to software version (B41.6) P5 or later.

2. Recalibrate the instrument cluster to the latest level using one of the following methods:

a) Worldwide Diagnostic System (WDS).

b) Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or

c) Equivalent scan tool.

^ If unable to calibrate the instrument cluster:

- prior to disconnecting the scan tool and closing the session, call the Special Service Support Center for further instructions.