Floor Console

FLOOR CONSOLE

Removal

All vehicles







1. Remove the LH and RH floor console front screw.
- Remove the cup holder.







2. If equipped with a manual transmission, disconnect the gearshift lever boot from the floor console.







3. Release the clips and remove the floor console trim panel.
- If equipped, disconnect the traction control switch.
- If equipped, disconnect the heated seat switches.

Vehicles with center armrest







4. Remove the rear floor console cover from the floor panel bracket.







5. Remove the armrest trim panel.







6. Remove the armrest.
- Remove the screws.

Vehicles without center armrest







7. Remove the insert from the rear of the floor console.







8. Remove the floor console rear nuts.

All vehicles







9. Position the parking brake lever to the full up position and remove the boot.







10. Remove the floor console.

Installation
1. To install, reverse the removal procedure.