Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> Mustang V8-4.6L VIN H >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> Digital Transmission Range (TR) Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Digital Transmission Range (TR) Sensor





Digital Transmission Range (TR) Sensor






Special Tool(s)

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. WARNING: Secure the transmission to the transmission jack with a safety chain. Failure to follow these instructions may result in personal injury.

Using a suitable transmission jack, support the transmission.






3. Remove the transmission mount crossmember and lower the transmission enough to gain access to the digital transmission range (TR) sensor.

- To install, tighten to 55 Nm (41 lb-ft).






4. Disconnect the digital TR sensor connector.






5. Disconnect the transmission shift cable from the manual control lever.






6. Remove the screws the digital TR screws and remove the digital TR sensor.

- To install, alternately tighten to 10 Nm (89 lb-in).






7. CAUTION: The digital transmission range sensor must fit flush against the boss on the case to prevent damage to the sensor.

NOTE: The manual lever must be in the NEUTRAL position when installing the digital TR.

Using the special tool, align the digital TR sensor.

8. To install, reverse the removal procedure.

9. Verify that the shift cable is adjusted correctly.
pro multis · About Operation CHARM