Intermediate Shaft Speed Sensor

Intermediate Shaft Speed Sensor

Removal
1. With the vehicle in NEUTRAL, position it on a hoist.





2. Disconnect intermediate shaft speed sensor electrical connector.





3. Remove intermediate shaft speed sensor.
1. Remove the intermediate shaft speed sensor screw.
2. Remove the intermediate shaft speed sensor from the transmission.
^ Inspect the intermediate shaft speed sensor O-ring for damage. If damaged, install a new O-ring.

Installation





1. Inspect and lubricate O-ring with petroleum jelly.
1. Install the intermediate shaft speed sensor into the transmission.
2. Tighten intermediate shaft speed sensor screw.





2. Connect intermediate shaft speed sensor electrical connector.
3. Lower the vehicle.